22-66
Catalyst 3550 Multilayer Switch Software Configuration Guide
78-11194-03
Chapter 22 Configuring IP Unicast Routing
Monitoring and Maintaining the IP Network
This is an example of output from the show ip route supernets-only privileged EXEC command. This
display shows supernets only; it does not show subnets.
Switch# show ip route supernets-only
Codes: I - IGRP derived, R - RIP derived, O - OSPF derived
C - connected, S - static, E - EGP derived, B - BGP derived
i - IS-IS derived, D - EIGRP derived
* - candidate default route, IA - OSPF inter area route
E1 - OSPF external type 1 route, E2 - OSPF external type 2 route
L1 - IS-IS level-1 route, L2 - IS-IS level-2 route
EX - EIGRP external route
Gateway of last resort is not set
B 198.92.0.0 (mask is 255.255.0.0) [20/0] via 198.92.72.30, 0:00:50
B 192.0.0.0 (mask is 255.0.0.0) [20/0] via 198.92.72.24, 0:02:50
This is an example of output from the show route-map privileged EXEC command:
Switch# show route-map
route-map abc, permit, sequence 10
Match clauses:
tag 1 2
Set clauses:
metric 5
route-map xyz, permit, sequence 20
Match clauses:
tag 3 4
Set clauses:
metric 6
