manualshive.com logo in svg

Cisco Catalyst 3550, Software Configuration Manual

The Cisco Catalyst 3550 is a powerful network switch that provides high-performance networking capabilities. Ensure a smooth installation with the comprehensive Installation Manual, available for free download from manualshive.com. This manual offers step-by-step instructions and valuable insights to maximize the potential of your Catalyst 3550, delivering exceptional networking performance.

Share
Download
background image

 

19-39

Catalyst 3550 Multilayer Switch Software Configuration Guide

78-11194-03

Chapter 19      Configuring Network Security with ACLs

Using VLAN Maps with Router ACLs

Note

When configuring ACLs on the switch, to allocate maximum hardware resources for ACLs, you can 
use the sdm prefer access global configuration command to set the Switch Database Management 
feature to the access template. For more information on the SDM templates, see the 

“Optimizing 

System Resources for User-Selected Features” section on page 6-57

.

Examples of Router ACLs and VLAN Maps Applied to VLANs

This section gives examples of applying router ACLs and VLAN maps to a VLAN for switched, bridged, 
routed, and multicast packets. Although the following illustrations show packets being forwarded to 
their destination, each time the packet’s path crosses a line indicating a VLAN map or an ACL, it is also 
possible that the packet might be dropped, rather than forwarded.

ACLs and Switched Packets

Figure 19-6

 shows how an ACL is applied on packets that are switched within a VLAN. Packets 

switched within the VLAN without being routed or forwarded by fallback bridging are only subject to 
the VLAN map of the input VLAN.

Figure 19-6 Applying ACLs on Switched Packets

VLAN 10

map

Frame

Input

router

ACL

Output

router

ACL

Routing function or

fallback bridge

Catalyst 3550 switch

VLAN 10

VLAN 20

Host C

(VLAN 10)

Host A

(VLAN 10)

VLAN 20

map

Packet

53035

Summary of Contents for Catalyst 3550































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Catalyst 3550

Extreme Networks ExtremeWare Enterprise Manager Installation And User Manual preview
ExtremeWare Enterprise Manager
Brand: Extreme Networks Pages: 264
Sun Microsystems 2005Q2 Quick Start Manual preview
2005Q2
Brand: Sun Microsystems Pages: 38
Alcatel neopost UK Manual preview
neopost UK
Brand: Alcatel Pages: 4
TC Electronic VSS3 Manual preview
VSS3
Brand: TC Electronic Pages: 22
Juniper BXOS 4.1 R2 Release Note preview
BXOS 4.1 R2
Brand: Juniper Pages: 24
Juniper JUNOS OS 10.3 - SOFTWARE Manual preview
JUNOS OS 10.3 - SOFTWARE
Brand: Juniper Pages: 3946
ESET SMART SECURITY User Manual preview
SMART SECURITY
Brand: ESET Pages: 38
Red Hat APPLICATION STACK 1.3 RELEASE Release Note preview
APPLICATION STACK 1.3 RELEASE
Brand: Red Hat Pages: 26
Red Hat APPLICATION STACK 2.1 RELEASE Release Note preview
APPLICATION STACK 2.1 RELEASE
Brand: Red Hat Pages: 26
Navman SPiN 100 User Manual preview
SPiN 100
Brand: Navman Pages: 52
Avision FS-5900C User Manual preview
FS-5900C
Brand: Avision Pages: 47
Nikon Digital Cameras Reference Manual preview
Digital Cameras
Brand: Nikon Pages: 51
VERITAS NetBackupTM 5.0 User Manual And Product Specifications preview
NetBackupTM 5.0
Brand: VERITAS Pages: 428
Autodesk 05720-017408-9621 - AE AUTOCAD LT 2000I LAB-PK 10U CD Tutorial preview
05720-017408-9621 - AE AUTOCAD LT 2000I LAB-PK 10U CD
Brand: Autodesk Pages: 21
Autodesk 00128-051462-9340 - AutoCAD 2008 - PC Manual preview
00128-051462-9340 - AutoCAD 2008 - PC
Brand: Autodesk Pages: 48
FieldServer FS-8707-06 Driver Manual preview
FS-8707-06
Brand: FieldServer Pages: 15
Spectra Logic Spectra nTier File Migrator User Manual preview
Spectra nTier File Migrator
Brand: Spectra Logic Pages: 92
Palm OS Devices User Manual preview
OS Devices
Brand: Palm Pages: 30

Brands by name

Popular brands

Load more brands