manualshive.com logo in svg

Cisco Catalyst 3550, Software Configuration Manual

The Cisco Catalyst 3550 is a powerful network switch that provides high-performance networking capabilities. Ensure a smooth installation with the comprehensive Installation Manual, available for free download from manualshive.com. This manual offers step-by-step instructions and valuable insights to maximize the potential of your Catalyst 3550, delivering exceptional networking performance.

Share
Download
background image

C H A P T E R

 

1-1

Catalyst 3550 Multilayer Switch Software Configuration Guide

78-11194-03

1

Overview

This chapter provides these topics about the Catalyst 3550 multilayer switch software:

•

Features, page 1-1

•

Management Options, page 1-5

•

Network Configuration Examples, page 1-7

Features

The Catalyst 3550 software supports the hardware listed in the release notes. These sections describe the 
features supported in this release.

Note

Layer 3 (routing) features require that you have the enhanced multilayer software image installed on 
your switch. All Catalyst 3550 Gigabit Ethernet switches ship with the enhanced multilayer software 
image (EMI) installed. Catalyst 3550 Fast Ethernet switches can be shipped with either the standard 
multilayer software image (SMI) or EMI pre-installed. You can order the Enhanced Multilayer Software 
Image Upgrade kit to upgrade Catalyst 3550 Fast Ethernet switches from running the SMI to the EMI. 

Table 1-1

Features

Ease of Use and Ease of Deployment

•

Cluster Management Suite (CMS) software for simplifying switch and switch cluster management through a web 
browser, such as Netscape Communicator or Microsoft Internet Explorer, from anywhere in your intranet

•

Switch clustering technology used with CMS, for

–

Unified configuration, monitoring, authentication, and software upgrade of multiple switches (refer to the release 
notes for a list of eligible cluster members).

–

Automatic discovery of candidate switches and creation of clusters of up to 16 switches that can be managed through 
a single IP address.

–

Extended discovery of cluster candidates that are not directly connected to the command switch.

•

Hot Standby Router Protocol (HSRP) for command-switch redundancy (requires the enhanced multilayer software 
image).

Note

See the 

“Advantages of Using CMS and Clustering Switches” section on page 1-6

. Refer to the release notes for the 

CMS, cluster hardware, software, and browser requirements.

Summary of Contents for Catalyst 3550































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Catalyst 3550

Garmin Laptop Manuel De Démarrage Rapide preview
Laptop
Brand: Garmin Pages: 12
Panasonic PT-D10000 Series Setup And Operation Manual preview
PT-D10000 Series
Brand: Panasonic Pages: 37
Vaisala Veriteq viewLinc 4.0 Administrator'S Manual preview
Veriteq viewLinc 4.0
Brand: Vaisala Pages: 168
American DJ myDMX 2.0 User Instructions preview
myDMX 2.0
Brand: American DJ Pages: 21
MACROMEDIA FLEX - DEVELOPING COMPONENTS AND THEMES Manual preview
FLEX - DEVELOPING COMPONENTS AND THEMES
Brand: MACROMEDIA Pages: 82
ACRONIS SNAP DEPLOY 2.0 - User Manual preview
SNAP DEPLOY 2.0 -
Brand: ACRONIS Pages: 68
Alarm Lock User Access Control (UAC) in Windows® Vista Tech Note preview
User Access Control (UAC) in Windows® Vista
Brand: Alarm Lock Pages: 2
AMD AMD-8151 HyperTransport AGP3.0 Revision preview
AMD-8151 HyperTransport AGP3.0
Brand: AMD Pages: 16
Fortinet FortiClient Datasheet preview
FortiClient
Brand: Fortinet Pages: 4
Epson PC Free Operation Manual preview
PC Free
Brand: Epson Pages: 22
Epson Message Broadcasting Getting Started Manual preview
Message Broadcasting
Brand: Epson Pages: 9
Epson EX3200 Brochure & Specs preview
EX3200
Brand: Epson Pages: 4
Epson LQ-860 - Impact Printer Specifications preview
LQ-860 - Impact Printer
Brand: Epson Pages: 8
Epson EX3220 Product Overview And Specifications preview
EX3220
Brand: Epson Pages: 4
Epson C300011B - Stylus Pro 5500 Color Inkjet Printer Getting Started Manual preview
C300011B - Stylus Pro 5500 Color Inkjet Printer
Brand: Epson Pages: 11
Epson LQ Color driver Product Support Bulletin preview
LQ Color driver
Brand: Epson Pages: 11
Epson Photo File Uploader3 User Manual preview
Photo File Uploader3
Brand: Epson Pages: 61
Epson PowerLite 1915 Brochure & Specs preview
PowerLite 1915
Brand: Epson Pages: 4

Brands by name

Popular brands

Load more brands