manualshive.com logo in svg

Cisco Catalyst 3550, Software Configuration Manual

The Cisco Catalyst 3550 is a powerful network switch that provides high-performance networking capabilities. Ensure a smooth installation with the comprehensive Installation Manual, available for free download from manualshive.com. This manual offers step-by-step instructions and valuable insights to maximize the potential of your Catalyst 3550, delivering exceptional networking performance.

Share
Download
background image

 

B-32

Catalyst 3550 Multilayer Switch Software Configuration Guide

78-11194-03

Appendix B      Working with the IOS File System, Configuration Files, and Software Images

Working with Software Images

If you specify the /leave-old-sw, the existing files are not removed. If there is not enough room to install 
the new image an keep the running image, the download process stops, and an error message is 
displayed.

The algorithm installs the downloaded image onto the system board Flash device (flash:). The image is 
placed into a new directory named with the software version string, and the BOOT environment variable 
is updated to point to the newly installed image.

If you kept the old software during the download process (you specified the /leave-old-sw keyword), 
you can remove it by entering the delete /force /recursive filesystem:/file-url privileged EXEC 
command. For filesystem, use flash: for the system board Flash device. For file-url, enter the directory 
name of the old software image. All the files in the directory and the directory are removed.

Caution

For the download and upload algorithms to operate properly, do not rename image names.

Uploading an Image File By Using RCP

You can upload an image from the switch to an RCP server. You can later download this image to the 
same switch or to another switch of the same type.

The upload feature is available only if the HTML pages associated with the Cluster Management Suite 
(CMS) have been installed with the existing image.

Beginning in privileged EXEC mode, follow these steps to upload an image to an RCP server:

Command

Purpose

Step 1

Verify that the RCP server is properly configured by 
referring to the 

“Preparing to Download or Upload an Image 

File By Using RCP” section on page B-29

.

Step 2

Log into the switch through the console port or a Telnet 
session.

Step 3

configure terminal

Enter global configuration mode.

This step is required only if you override the default remote 
username (see Steps 4 and 5). 

Step 4

ip rcmd remote-username username

(Optional) Specify the remote username.

Summary of Contents for Catalyst 3550































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Catalyst 3550

CSSN ScanShell 3000 User Manual preview
ScanShell 3000
Brand: CSSN Pages: 8
Eaton Network Shutdown Module V3 User Manual preview
Network Shutdown Module V3
Brand: Eaton Pages: 65
Symantec GHOST IMAGING FOUNDATION 7.1 Manual preview
GHOST IMAGING FOUNDATION 7.1
Brand: Symantec Pages: 189
MACROMEDIA CONTRIBUTE-USING CONTRIBUTE Use Manual preview
CONTRIBUTE-USING CONTRIBUTE
Brand: MACROMEDIA Pages: 214
Blackberry TICKETMASTER - LEARN MORE User Manual preview
TICKETMASTER - LEARN MORE
Brand: Blackberry Pages: 7
Waves MultiRack SoundGrid Troubleshooting Manual preview
MultiRack SoundGrid
Brand: Waves Pages: 39
3Com 3CR15800 - Intelligent Management Center Enterprise... Datasheet preview
3CR15800 - Intelligent Management Center Enterprise...
Brand: 3Com Pages: 4
Bosch VIDOS Installation And Operating Manual preview
VIDOS
Brand: Bosch Pages: 40
Bosch Divar Archive Player Operation Manual preview
Divar Archive Player
Brand: Bosch Pages: 10
Bosch MBV-BPRO-40 Operator'S Manual preview
MBV-BPRO-40
Brand: Bosch Pages: 86
Bosch DINION IP 5000 MP Software Manual preview
DINION IP 5000 MP
Brand: Bosch Pages: 112
Billion BiGuard C01 Quick Installation Manual preview
BiGuard C01
Brand: Billion Pages: 18
Red Hat CLUSTER FOR ENTERPRISE LINUX 5.0 Configuration Manual preview
CLUSTER FOR ENTERPRISE LINUX 5.0
Brand: Red Hat Pages: 114
Tektronix PhaserPrint 2.0 Configuration Manual preview
PhaserPrint 2.0
Brand: Tektronix Pages: 2
SkyLink AD-106 User Instruction preview
AD-106
Brand: SkyLink Pages: 6
Nikon Nikon View Software Manual preview
Nikon View
Brand: Nikon Pages: 12
TANDBERG D4068 Installation Manual preview
D4068
Brand: TANDBERG Pages: 19
Parallel Parallels Desktop 4.0 Brochure & Specs preview
Parallels Desktop 4.0
Brand: Parallel Pages: 2

Brands by name

Popular brands

Load more brands