manualshive.com logo in svg

Cisco Catalyst 3550, Software Configuration Manual

The Cisco Catalyst 3550 is a powerful network switch that provides high-performance networking capabilities. Ensure a smooth installation with the comprehensive Installation Manual, available for free download from manualshive.com. This manual offers step-by-step instructions and valuable insights to maximize the potential of your Catalyst 3550, delivering exceptional networking performance.

Share
Download
background image

 

24-14

Catalyst 3550 Multilayer Switch Software Configuration Guide

78-11194-03

Chapter 24      Configuring IP Multicast Routing

Configuring IP Multicast Routing

Multicast Routing Configuration Guidelines

To avoid misconfiguring multicast routing on your multilayer switch, review the information in these 
sections:

•

PIMv1 and PIMv2 Interoperability, page 24-14

•

Auto-RP and BSR Configuration Guidelines, page 24-15

PIMv1 and PIMv2 Interoperability

The Cisco PIMv2 implementation allows interoperability and transition between Version 1 and 
Version 2, although there might be some minor problems. 

You can upgrade to PIMv2 incrementally. PIM Versions 1 and 2 can be configured on different routers 
and multilayer switches within one network. Internally, all routers and multilayer switches on a shared 
media network must run the same PIM version. Therefore, if a PIMv2 device detects a PIMv1 device, 
the Version 2 device downgrades itself to Version 1 until all Version 1 devices have been shut down or 
upgraded.

PIMv2 uses the BSR to discover and announce RP-set information for each group prefix to all the routers 
and multilayer switches in a PIM domain. PIMv1, together with the Auto-RP feature, can perform the 
same tasks as the PIMv2 BSR. However, Auto-RP is a standalone protocol, separate from PIMv1, and 
is a proprietary Cisco protocol. PIMv2 is a standards track protocol in the IETF. We recommend that you 
use PIMv2. The BSR mechanism interoperates with Auto-RP on Cisco routers and multilayer switches. 
For more information, see the 

“Auto-RP and BSR Configuration Guidelines” section on page 24-15

.

When PIMv2 devices interoperate with PIMv1 devices, Auto-RP should have already been deployed. A 
PIMv2 BSR that is also an Auto-RP mapping agent automatically advertises the RP elected by Auto-RP. 
That is, Auto-RP sets its single RP on every router or multilayer switch in the group. Not all routers and 
switches in the domain use the PIMv2 hash function to select multiple RPs.

Dense-mode groups in a mixed PIMv1 and PIMv2 region need no special configuration; they 
automatically interoperate.

Sparse-mode groups in a mixed PIMv1 and PIMv2 region are possible because the Auto-RP feature in 
PIMv1 interoperates with the PIMv2 RP feature. Although all PIMv2 devices can also use PIMv1, we 
recommend that the RPs be upgraded to PIMv2 (or at least upgraded to PIMv1 in the Cisco IOS 
Release 11.3 software). To ease the transition to PIMv2, we have these recommendations:

•

Use Auto-RP throughout the region.

•

Configure sparse-dense mode throughout the region.

If Auto-RP is not already configured in the PIMv1 regions, configure Auto-RP. For more information, 
see the 

“Configuring Auto-RP” section on page 24-18

.

Candidate RPs

Disabled.

Shortest-path tree threshold rate

0 kbps.

PIM router query message interval

30 seconds.

Table 24-1 Default Multicast Routing Configuration (continued)

Feature

Default Setting

Summary of Contents for Catalyst 3550































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Catalyst 3550

Mitsubishi DX-PC3 Instruction Manual preview
DX-PC3
Brand: Mitsubishi Pages: 38
Alcatel VitalQIP Specifications preview
VitalQIP
Brand: Alcatel Pages: 4
Lucent Technologies CentreVu User Manual preview
CentreVu
Brand: Lucent Technologies Pages: 198
CAKEWALK Cakewalk SONAR User Manual preview
Cakewalk SONAR
Brand: CAKEWALK Pages: 610
Garmin Pilot for Android User Manual preview
Pilot for Android
Brand: Garmin Pages: 150
Nordic Messaging Technologies XFAX User Manual preview
XFAX
Brand: Nordic Messaging Technologies Pages: 62
Red Hat ENTERPRISE LINUX 5 - DM MULTIPATH Configuration And Administration Manual preview
ENTERPRISE LINUX 5 - DM MULTIPATH
Brand: Red Hat Pages: 42
Qlogic SANsurfer FC HBA Manager User Manual preview
SANsurfer FC HBA Manager
Brand: Qlogic Pages: 152
Quantum GoVault 40GB Software Manual preview
GoVault 40GB
Brand: Quantum Pages: 142
Key Curriculum Press Geometer's Sketchpad User Manual And Reference Manual preview
Geometer's Sketchpad
Brand: Key Curriculum Press Pages: 92
Mackie Final Mix VST Manual preview
Final Mix VST
Brand: Mackie Pages: 26
Lenovo ThinkStation D20 Safety And Warranty Manual preview
ThinkStation D20
Brand: Lenovo Pages: 272
FARONICS DEEP FREEZE ENTERPRISE - COMPUTER ASSOCIATES ETRUST ANTIVIRUS... Manual preview
DEEP FREEZE ENTERPRISE - COMPUTER ASSOCIATES ETRUST ANTIVIRUS...
Brand: FARONICS Pages: 11
MACROMEDIA FLEX-GETTING STARTED WITH FLEX Getting Started preview
FLEX-GETTING STARTED WITH FLEX
Brand: MACROMEDIA Pages: 86
MACROMEDIA FLASH MEDIA SERVER 2-CLIENT-SIDE ACTIONSCRIPT LANGUAGE REFERENCE FOR FLASH MEDIA SERVER... Reference preview
FLASH MEDIA SERVER 2-CLIENT-SIDE ACTIONSCRIPT LANGUAGE REFERENCE FOR FLASH MEDIA SERVER...
Brand: MACROMEDIA Pages: 156
Generic Media gMovie 1.3 Operating Instructions Manual preview
gMovie 1.3
Brand: Generic Media Pages: 14
I.R.I.S. READIRIS PRO 12 Quick User Manual preview
READIRIS PRO 12
Brand: I.R.I.S. Pages: 2
Jabra PC Suite Installation Manual preview
PC Suite
Brand: Jabra Pages: 5

Brands by name

Popular brands

Load more brands