manualshive.com logo in svg

Cisco Catalyst 3550, Software Configuration Manual

The Cisco Catalyst 3550 is a powerful network switch that provides high-performance networking capabilities. Ensure a smooth installation with the comprehensive Installation Manual, available for free download from manualshive.com. This manual offers step-by-step instructions and valuable insights to maximize the potential of your Catalyst 3550, delivering exceptional networking performance.

Share
Download
background image

 

5-17

Catalyst 3550 Multilayer Switch Software Configuration Guide

78-11194-03

Chapter 5      Clustering Switches

Planning a Switch Cluster

If Terminal Access Controller Access Control System Plus () is configured on the command 
switch, must also be configured on all member switches to access the switch cluster from 
CMS. For more information about , see the 

“Controlling Switch Access with ” 

section on page 6-10

.

Access Modes in CMS

CMS provides two levels of access to the configuration options: read-write access and read-only access. 
Privilege levels 0 to 15 are supported.

•

Privilege level 15 provides you with read-write access to CMS.

•

Privilege levels 1 to 14 provide you with read-only access to CMS. Any options in the CMS 
windows, menu bar, toolbar, and popup menus that change the switch or cluster configuration are 
not shown in read-only mode.

•

Privilege level 0 denies access to CMS.

For more information about CMS access modes, see the 

“Access Modes in CMS” section on page 3-31

.

Note

•

If your cluster has these member switches running earlier software releases and if you have 
read-only access to these member switches, some configuration windows for those switches 
display incomplete information:

–

Catalyst 2900 XL or Catalyst 3500 XL member switches running Cisco IOS 
Release 12.0(5)WC2 or earlier

–

Catalyst 2950 member switches running Cisco IOS Release 12.0(5)WC2 or earlier

–

Catalyst 3550 member switches running Cisco IOS Release 12.1(6)EA1 or earlier

For more information about this limitation, refer to the Catalyst 3550 release notes.

•

These switches do not support read-only mode on CMS:

–

Catalyst 1900 and Catalyst 2820

–

Catalyst 2900 XL switches with 4-MB CPU DRAM

In read-only mode, these switches appear as unavailable devices and cannot be configured from 
CMS.

LRE Profiles

A configuration conflict occurs if a switch cluster has LRE switches using both private and public 
profiles. If one LRE switch in a cluster is assigned a public profile, all LRE switches in that cluster must 
have that same public profile. Before you add an LRE switch to a cluster, make sure that you assign it 
the same public profile used by other LRE switches in the cluster. 

A cluster can have a mix of LRE switches using different private profiles.

For more information about the Catalyst 2900 LRE XL switches and LRE technology, refer to the 
Catalyst 2900 XL and Catalyst 3500 XL documentation for Cisco IOS Release 12.0(5)WC2.

Summary of Contents for Catalyst 3550































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Catalyst 3550

MACROMEDIA FLASH 8-FLASH Tutorials Manual preview
FLASH 8-FLASH
Brand: MACROMEDIA Pages: 292
MACROMEDIA BREEZE 5 Manual preview
BREEZE 5
Brand: MACROMEDIA Pages: 26
MACROMEDIA BREEZE Installation Manual preview
BREEZE
Brand: MACROMEDIA Pages: 32
Brocade Communications Systems VA-40FC Hardware Reference Manual preview
VA-40FC
Brand: Brocade Communications Systems Pages: 60
FARONICS DEEP FREEZE - INTEGRATING WITH ALTIRIS... Manual preview
DEEP FREEZE - INTEGRATING WITH ALTIRIS...
Brand: FARONICS Pages: 22
Casio FA-B30 User Manual preview
FA-B30
Brand: Casio Pages: 68
Better Edge technology 5.2.7.0 User Manual preview
5.2.7.0
Brand: Better Edge technology Pages: 121
Nortel CallPilot 5.0 Quick Start Manual preview
CallPilot 5.0
Brand: Nortel Pages: 66
Symantec Veritas CommandCentral 5.1 Getting Started Manual preview
Veritas CommandCentral 5.1
Brand: Symantec Pages: 52
Seagate FreeAgent Desk Specifications preview
FreeAgent Desk
Brand: Seagate Pages: 2
Pfaff CREATIVE 4D Brochure preview
CREATIVE 4D
Brand: Pfaff Pages: 8
A&D Doctor Pro TM-2430-13 Instruction Manual preview
Doctor Pro TM-2430-13
Brand: A&D Pages: 69
Oracle Application 9i Configuration Manual preview
Application 9i
Brand: Oracle Pages: 140
Autodesk 18507-051452-9325 - UPG ARCH DESKTOP 2007 Installation Manual preview
18507-051452-9325 - UPG ARCH DESKTOP 2007
Brand: Autodesk Pages: 104
MACROMEDIA BREEZE-USING THE MACROMEDIA BREEZE MANAGER Use Manual preview
BREEZE-USING THE MACROMEDIA BREEZE MANAGER
Brand: MACROMEDIA Pages: 146
LXE 1280 Reference Manual preview
1280
Brand: LXE Pages: 260
Echo Audio LAYLA LapTop Owner'S Manual preview
LAYLA LapTop
Brand: Echo Audio Pages: 66
Canon 40D - EOS 40D DSLR Software User'S Manual preview
40D - EOS 40D DSLR
Brand: Canon Pages: 50

Brands by name

Popular brands

Load more brands