manualshive.com logo in svg

Cisco Catalyst 3550, Software Configuration Manual

The Cisco Catalyst 3550 is a powerful network switch that provides high-performance networking capabilities. Ensure a smooth installation with the comprehensive Installation Manual, available for free download from manualshive.com. This manual offers step-by-step instructions and valuable insights to maximize the potential of your Catalyst 3550, delivering exceptional networking performance.

Share
Download
background image

 

5-21

Catalyst 3550 Multilayer Switch Software Configuration Guide

78-11194-03

Chapter 5      Clustering Switches

Creating a Switch Cluster

Figure 5-10 Add to Cluster Window 

Figure 5-11 Using the Topology View to Add Member Switches

Enter the password of 
the candidate switch. If 
no password exists for 
the switch, leave this 
field blank.

Select a switch, and click 
Add. Press Ctrl and left-
click to select more than 
one switch.

2900-LRE-24-1

65724

Thin line means a 

connection to a 

candidate switch.

Right-click a candidate 

switch to display the 

pop-up menu, and select 

Add to Cluster to add 

the switch to the cluster.

65725

Summary of Contents for Catalyst 3550































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Catalyst 3550

Canon EOS 60D Quick Start Manual preview
EOS 60D
Brand: Canon Pages: 5
Samsung UN40C7000WF User Manual preview
UN40C7000WF
Brand: Samsung Pages: 7
Xerox Wide Format 6030 Release Note preview
Wide Format 6030
Brand: Xerox Pages: 8
Autodesk AUTOCAR CIVIL 2010 Brochure preview
AUTOCAR CIVIL 2010
Brand: Autodesk Pages: 6
Nortel Contivity VPN Client User Manual preview
Contivity VPN Client
Brand: Nortel Pages: 90
NEC NECSAM RICHER APPT FINAL2 Manual preview
NECSAM RICHER APPT FINAL2
Brand: NEC Pages: 1
NEC NECAM NEWSREL 070306 Manual preview
NECAM NEWSREL 070306
Brand: NEC Pages: 2
NEC NEC Hiperwall Quick Start Manual preview
NEC Hiperwall
Brand: NEC Pages: 3
NEC N412I - 1 Operation Manual preview
N412I - 1
Brand: NEC Pages: 9
NEC MultiProfiler User Manual preview
MultiProfiler
Brand: NEC Pages: 49
NEC SMB8000 Manual preview
SMB8000
Brand: NEC Pages: 56
NEC NEC Storage PathManager 3.1 User Manual preview
NEC Storage PathManager 3.1
Brand: NEC Pages: 65
NEC MultiSync FP1375X User Manual preview
MultiSync FP1375X
Brand: NEC Pages: 64
NEC MultiSync FP955 User Manual preview
MultiSync FP955
Brand: NEC Pages: 68
Red Hat APPLICATION STACK 1.3 RELEASE Release Note preview
APPLICATION STACK 1.3 RELEASE
Brand: Red Hat Pages: 26
Polycom CMA V4.0 User Manual preview
CMA V4.0
Brand: Polycom Pages: 23
Symantec ALTIRIS SECURITY EXPRESSIONS Datasheet preview
ALTIRIS SECURITY EXPRESSIONS
Brand: Symantec Pages: 4
Symantec ALTIRIS IT MANAGEMENT SUITE 7.0 MR1 - S V1.0 New Features Manual preview
ALTIRIS IT MANAGEMENT SUITE 7.0 MR1 - S V1.0
Brand: Symantec Pages: 13

Brands by name

Popular brands

Load more brands