![background image](http://html.mh-extra.com/html/cisco/asr-9000-series/asr-9000-series_command-reference-manual_64844641.webp)
--------------------
--------------- ----------- -------------- -----------
Gi0/0/0/2
Local
Active
0x8000, 0x0002
100000
Table 39: show bundle Field Descriptions
Description
Field
Full name of the bundle interface, where
type
is Ether
(Ethernet) , followed by the configured
number
of
the bundle.
Bundle-
typenumber
State of the bundle on the local device, with one of
the following possible values:
•
Admin down
—
The bundle has been configured
to be shut down.
•
Bundle shut
—
The bundle is holding all links in
Standby state and will not support any traffic.
•
Down
—
The bundle is operationally down. It
has no Active members on the local device.
•
mLACP cold standby
—
The bundle is acting as
a multichassis LACP Standby device, but the
higher layers are not synchronized.
•
mLACP hot standby
—
The bundle is Up on the
mLACP peer device, and the local device is
ready to take over if that bundle goes down on
the peer.
•
Nak
—
The local and peer devices cannot resolve
a configuration error.
•
Partner down
—
The partner system indicates
that the bundle is unable to forward traffic at its
end.
•
PE isolated
—
The bundle is isolated from the
core.
•
Up
—
The bundle has Active members on this
device.
Status:
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
621
Link Bundling Commands on the Cisco ASR 9000 Series Router
show bundle