2-7
Cisco Unified IP Conference Station 7936 Administration Guide
OL-10751-01
Chapter 2 Setting Up the Cisco Unified IP Conference Station 7936
Installing the Cisco Unified IP Conference Station 7936
Installing the Cisco Unified IP Conference Station
7936
Before you begin the installation of the Cisco Unified IP Conference Station,
review the following information:
•
“Network Requirements” section on page 2-7
•
“Cisco Unified CallManager Configuration” section on page 2-8
•
“Safety Notices” section on page 2-8
•
“Installing and Connecting to the Network” section on page 2-16
•
Additional information in the
Regulatory Compliance and Safety Information
for the Cisco Unified IP Conference Station 7936
guide
Package Contents
Refer to the section on
Installing and Connecting to the Network, page 2-16
for
detailed information on package contents.
Network Requirements
For the Cisco Unified IP Conference Station to successfully operate as an IP
conference station endpoint in your network, your network must meet the
following requirements:
•
Working VoIP (VoIP) Network
–
VoIP configured on your Cisco routers and gateways
–
Cisco Unified CallManager installed in your network and configured for
call processing
•
IP network that supports DHCP or manual configuration of IP address,
gateway, and subnet mask
•
TFTP Server
