4-3
Cisco Unified IP Conference Station 7936 Administration Guide
OL-10751-01
Chapter 4 Troubleshooting the Cisco Unified IP Conference Station 7936
Other Troubleshooting Information
To use Ping, follow these steps:
Procedure
Step 1
Press the
Menu
button.
Step 2
Press the
Up
or
Down
scroll button to select Admin Setup.
Step 3
Press the
Select
button.
Step 4
Enter the administrator password (the default administrator password is **#) and
then press the
Enter
softkey.
Step 5
Press the
Up
or
Down
scroll button to select Diagnostics, and then press the
Select
button.
Step 6
Select Ping and press the
Select
button.
Step 7
Use the dialing pad to enter the IP address of the device you want to ping.
Press the
.
softkey to enter periods (.) and press the
<
softkey to correct mistakes.
Step 8
Press the
Execute
softkey.
A reply message similar to the following should display:
Reply from 0.0.0.0
Step 9
Press the
Menu
button to go back to the Diagnostics menu, or press the
Exit
button to return to the resting display.
Other Troubleshooting Information
Table 4-1
provides troubleshooting information for possible problems with the
Cisco Unified IP Conference Station.
