Chapter 3 Configuring the Cisco Unified IP Conference Station 7936
Verifying Firmware Version Information
3-18
Cisco Unified IP Conference Station 7936 Administration Guide
OL-10751-01
Step 7
In the HTTP Port field, enter a new HTTP port number.
Note
The default value is 80. You can enter any number. Users will have to use
this number suffixed to the IP address of the Cisco Unified IP Conference
Station when they access the web interface.
Step 8
Press the
Save
softkey to save your changes.
Verifying Firmware Version Information
You can obtain information about the firmware version installed on the
Cisco Unified IP Conference Station.
To verify the firmware version on an Cisco Unified IP Conference Station, follow
these steps:
Procedure
Step 1
Press the
Menu
button.
Step 2
Press the
Up
or
Down
scroll button to select the Admin Setup menu.
Step 3
Press the
Select
button.
Step 4
Enter the administrator password. (The default administrator password is **#.)
Step 5
Press the
Enter
softkey.
Step 6
Press the
Up
or
Down
scroll button to select System Information.
Step 7
Press the
Select
button.
