Chapter 3 Configuring the Cisco Unified IP Conference Station 7936
Accessing Network Configuration Settings
3-12
Cisco Unified IP Conference Station 7936 Administration Guide
OL-10751-01
To manually configure a subnet mask, follow these steps:
Procedure
Step 1
Press the
Up
or
Down
scroll button to select IP Mask.
The current IP Mask is displayed.
Step 2
Use the
<
softkey to delete the current subnet mask.
Step 3
Use the dialing pad to enter a new subnet mask.
Use the
.
softkey to enter periods (.) and the
<
softkey to correct any mistakes.
Step 4
Press the
Validate
softkey to check the IP address, mask and router. Press the
Save
softkey to save your changes.
Assigning a Default Gateway
Note
You can only manually assign a default gateway if DHCP is disabled.
When you manually assign an IP address to an
Cisco Unified IP Conference Station, you can assign the default gateway to be
used.
To manually configure a default gateway, follow these steps:
Procedure
Step 1
Press the
Up
or
Down
scroll button to select Router 1.
The current router IP address is displayed.
Step 2
Use the
<
softkey to delete the current IP address.
