3-7
Cisco Unified IP Conference Station 7936 Administration Guide
OL-10751-01
Chapter 3 Configuring the Cisco Unified IP Conference Station 7936
Verifying System Settings
SW (software)
Version
Indicates the firmware version
loaded on the
IP Conference Station.
This number is set automatically by the
IP Conference Station.
Dial Tone
Indicates the dial tone setting on
the IP Conference Station.
The default is Tone 1.
Ringer
Indicates the ringer sound setting
on the IP Conference Station.
There are five ringer sounds. You can also
shut off the ringer sound, in which case
Ring Off would display on the LCD
screen. The default ringer is Pro Ring.
Time
Indicates the time setting on the
IP Conference Station.
There are two time format
settings—12 hour and 24 hour.
Date
Indicates the date setting on the
IP Conference Station.
There are two date format
settings—MM/DD/YY and DD/MM/YY.
Codec
Indicates the compression setting
on the IP Conference Station.
This is set automatically by the
IP Conference Station.
Net Config
Indicates the Ethernet port
configuration on the
IP Conference Station.
This setting may be configured for full- or
half-duplex (FDX or HDX).
Net Speed
Indicates the Ethernet port speed
configuration on the
IP Conference Station.
This configuration may be set to
10 Mbps, 100 Mbps, or Auto. The default
is set to Auto.
HTTP Port
Indicates the HTTP port through
which users access the web
interface.
The default HTTP port is 80. This port
number may be set to any number. If you
change the default value, users will have
to append the port number as a suffix to
the IP address of the IP Conference
Station when they access the web
interface.
Elapsed Time
Indicates the elapsed time since the
last reboot.
This value is automatically updated by
the Cisco Unified IP Conference Station.
Table 3-2
System Verification Steps on the Cisco Unified Conference Station (continued)
System Setting
Description
Usage Notes
