3-15
Cisco Unified IP Conference Station 7936 Administration Guide
OL-10751-01
Chapter 3 Configuring the Cisco Unified IP Conference Station 7936
Accessing Network Configuration Settings
Step 3
Use the dialing pad to enter a new VLAN ID (0 - 4094).
Step 4
Press the
Validate
softkey to check the VLAN ID. Press the
Save
softkey to save
your changes.
Configuring Alternate TFTP Options
If DHCP is enabled in your network, the IP address of the TFTP Server that is to
be used by the Cisco Unified IP Conference Station is automatically assigned.
This setting cannot be changed; however, you can override the TFTP Server
setting by manually configuring an alternate TFTP Server that is to be used by the
Cisco Unified IP Conference Station to obtain configuration files and firmware.
If DHCP is disabled in your network, you must manually configure TFTP Server
1 to be used by the Cisco Unified IP Conference Station. You may optionally
configure TFTP Server 2 and 3.
To configure an alternate TFTP Server, see the
“Using an Alternate TFTP Server”
section on page 3-15
.
Using an Alternate TFTP Server
If you want to override the TFTP Server setting that the
Cisco Unified IP Conference Station received through DHCP, you must manually
enable an alternate TFTP Server. (Use this option if you want to point your
Cisco Unified IP Conference Station to a specific TFTP Server.)
To enable an alternate TFTP Server, follow these steps:
Procedure
Step 1
Press the
Up
or
Down
scroll button to select Alt TFTP.
If the Cisco Unified IP Conference Station is not using an alternate TFTP Server,
the option displays as:
Alt TFTP NO.
Step 2
Press the
Yes
softkey.
The Alternate TFTP option reads
Yes
.
