3-19
Cisco Unified IP Conference Station 7936 Administration Guide
OL-10751-01
Chapter 3 Configuring the Cisco Unified IP Conference Station 7936
Resetting the Cisco Unified IP Conference Station
Step 8
Press the
Up
or
Down
scroll button to select SW Version.
The firmware version number is displayed.
Resetting the Cisco Unified IP Conference Station
To reset the Cisco Unified IP Conference Station, press
* * # * *
on the dialing
pad while the phone is in menu screens. The following message appears:
Restarting.
The Cisco Unified IP Conference Station re-starts and goes through the startup
process.
Caution
If you reset the Cisco Unified IP Conference Station, any changes made that have
not been saved are lost and set back to the previous settings.
Erasing the Local Configuration
If you want to erase all locally-stored configuration options, you can do so by
restoring all settings to their factory default values, including enabling DHCP.
Caution
Erasing the local configuration removes all user-defined changes made locally on
the Cisco Unified IP Conference Station, including the Phone Book. If you
choose this option, these settings are set back to their original, default values.
To restore the default settings, follow these steps:
Procedure
Step 1
Press the
Menu
button.
Step 2
Press the
Up
or
Down
scroll button to select the Admin Setup menu.
Step 3
Press the
Select
button.
