2-29
Cisco Unified IP Conference Station 7936 Administration Guide
OL-10751-01
Chapter 2 Setting Up the Cisco Unified IP Conference Station 7936
Using the Cisco Unified IP Conference Station 7936
Using the Keyboard Commands
The following keyboard commands are available for use on the
Cisco Unified IP Conference Station 7936.
Keyboard Command
Accessible State
Feature Description
**#
In menu screens.
Use this command to access the Administrator
menus.
**#**
In resting mode and two
levels of menu screens.
For example, you could use
this keyboard command
from the Main menu
(first level) or from the
Admin Setup menu
(second level).
Use this command to restart the
Cisco Unified IP Conference Station.
**1
In resting mode.
This command restores the default
configuration of the
Cisco Unified IP Conference Station. A
confirmation screen is displayed before
execution.
**6
In resting mode.
This command displays the MAC address of the
Cisco Unified IP Conference Station.
**4
In resting mode.
Use this command to enable a Telnet connection
to the phone. Telnet will be enabled until the
phone is reset.
**8
In resting mode.
Use this command to invoke the digital signal
processor (DSP) state information display.
Note
To see the DSP information, this must be
done prior to a call being made.
Once you are in a call, press the
Select
key to
display; the DSP information will be displayed
for the remainder of the call.
<Select, Select>
During an active call.
This command displays the active call statistics
and the codec that is in use.
