Chapter 3 Configuring the Cisco Unified IP Conference Station 7936
Accessing Network Configuration Settings
3-10
Cisco Unified IP Conference Station 7936 Administration Guide
OL-10751-01
Disabling DHCP
If you are not using DHCP in your network, you can disable DHCP.
Disabling DHCP will enable configuration of a static IP address and Router IP
address.
To disable DHCP before you manually assign an IP address to a Cisco Unified IP
Conference Station, follow these steps:
Procedure
Step 1
From the Network Setup menu, press the
Up
or
Down
scroll button to select
DHCP.
If DHCP is enabled, the option displays as:
DHCP Enabled
Step 2
Press the
Disable
softkey to disable DHCP.
Step 3
Press the
Save
softkey.
Step 4
Press the
Yes
softkey to save your changes, or press
No
to cancel.
Step 5
Press the
Exit
button to return to the resting display menu.
Configuring IP Settings
Use these guidelines, along with the information in the following sections, to
manually configure the IP settings on your Cisco Unified IP Conference Station.
•
You can use 0.0.0.0 for the subnet mask only if the default gateway is also
0.0.0.0.
•
Ensure the TFTP server has an IP address.
•
Ensure the default gateway IP address is on the same subnet as the host IP
address.
