Chapter 3 Configuring the Cisco Unified IP Conference Station 7936
Accessing Network Configuration Settings
3-8
Cisco Unified IP Conference Station 7936 Administration Guide
OL-10751-01
Accessing Network Configuration Settings
You must log in through the Admin Setup menu in order to access the
IP Conference Station network settings.
To access the network settings, follow these steps:
Procedure
Step 1
Press the
Menu
button.
Step 2
Press the
Up
or
Down
scroll button to select the Admin Setup menu.
Step 3
Press the
Select
button.
Step 4
Enter the administrator password. (The default administrator password is **#.)
Step 5
Press the
Enter
softkey.
Step 6
Press the
Up
or
Down
scroll button to select Network Setup, and then press the
Select
button.
DSCP Call Ctl
Indicates the DSCP classification
for protocol interfaces that are used
in Cisco Unified
CallManager-to-device
communications.
This parameter is assigned through Cisco
Unified CallManager.
DSCP Config
Interfaces the DSCP classification
for any SCCP-based phone
configuration, including any TFTP,
DNS or DHCP access that is
necessary for phone configuration.
This parameter is assigned through Cisco
Unified CallManager.
DSCP Services
Indicates the DSCP classification
for IP phone services on
SCCP-based phones, including any
HTTP traffic.
This parameter is assigned through Cisco
Unified CallManager.
Table 3-2
System Verification Steps on the Cisco Unified Conference Station (continued)
System Setting
Description
Usage Notes
