2-16
Cisco 6260 Hardware Installation Guide
OL-2365-02
Chapter 2 Preparing for Installation
Required Tools and Equipment
2.3 Required Tools and Equipment
Table 2-4
lists the tools and equipment you need to install and connect the Cisco 6260
system components as detailed in
Chapter 3, “Installing a Cisco 6260 with a POTS
Splitter Configuration,”
and
Chapter 4, “Installing a Cisco 6260 Without a POTS
Splitter Configuration.”
Table 2-4
also lists the tools and equipment you need to remove and install the Cisco 6260 system
components as detailed in
Chapter 6, “Upgrading and Maintaining the Cisco 6260 System.”
Table 2-4
Tool and Equipment Requirements Checklist
Check
Tools and Equipment
Hardware Components
Cisco 6260 chassis
Line cards (if not already installed in the Cisco 6260 chassis)
•
4xDMT
•
4xDMT over ISDN
•
4xflexi
•
4xSDSL
•
8xDMT
•
8xDMT over ISDN
•
8xG.SHDSL
NI-2 card(s) (if not already installed in the Cisco 6260 chassis)
•
DS3/2DS3
•
DS3+T1/E1 IMA
•
OC-3c/OC-3c SMF
1
or MMF
2
I/O module (if not already installed in the Cisco 6260 chassis)
•
E3
•
E1
•
OC-3c
Blank faceplates
Fan trays (if not already installed in the Cisco 6260 chassis)
PEMs (if not already installed in the Cisco 6260 chassis)
Champ cables
Third-party vendor POTS splitter
3
Software Components
•
Cisco IOS
•
CDM
4
Tools
A 3/16-inch flat-head screwdriver
A Phillips-head screwdriver