F I G U R E S
ix
Cisco 6260 Hardware Installation Guide
OL-2365-02
Figure 1-1
Cisco 6260 Chassis Components
1-2
Figure 1-2
Inverse Multiplexing and Recombining of ATM Cells Through IMA Groups
1-5
Figure 1-3
Subtended Network Configuration with DS3/2DS3 NI-2 Cards
1-8
Figure 1-4
Subtended Network Configuration Using DS3+T1/E1 IMA NI-2 Cards
1-9
Figure 1-5
Daisy Chain Topology for OC-3c Interfaces
1-10
Figure 1-6
Cisco 6260 Card Slots
1-12
Figure 1-7
Cisco 6260 Champ Connectors
1-13
Figure 1-8
4xDMT Faceplate
1-14
Figure 1-9
4xDMT over ISDN Faceplate
1-16
Figure 1-10
4xflexi Faceplate
1-18
Figure 1-11
4xSDSL Faceplate
1-20
Figure 1-12
8xDMT Faceplate
1-22
Figure 1-13
8xDMT Over ISDN Faceplate
1-24
Figure 1-14
8xG.SHDSL Faceplate
1-26
Figure 1-15
8xG.SHDSL Deployment in the Cisco 6260 System.
1-29
Figure 1-16
DS3/2DS3 NI-2 Card Faceplate
1-31
Figure 1-17
DS3+T1/E1 IMA NI-2 Card Faceplate
1-34
Figure 1-18
OC-3c/OC-3c NI-2 Card Faceplate
1-37
Figure 1-19
E3 I/O Module
1-42
Figure 1-20
E3 I/O Module
1-43
Figure 1-21
OC-3c I/O Module
1-43
Figure 1-22
I/O Module Wire-Wrap Pins Close-Up
1-44
Figure 1-23
PEM Faceplate
1-46
Figure 1-24
Cisco 6260 Fan Tray
1-47
Figure 1-25
Air Filters
1-48
Figure 2-1
Air Flow Through Intake and Exhaust Vents on the Cisco 6260 Chassis.
2-13
Figure 3-1
Mounting Options for Ear Brackets
3-4
Figure 3-2
Screw the Mounting Aids to the Rack
3-5
Figure 3-3
Mounting Aids Support the Chassis During Installation
3-6
Figure 3-4
System Ground Connection
3-8
Figure 3-5
Strip and Square Off Power and Ground Wires
3-10
