5-19
Cisco 6260 Hardware Installation Guide
OL-2365-01
Chapter 5 Troubleshooting
Alarms
The source of the E1 alarms in
Table 5-15
is one of the following interfaces: ATM0/2 through ATM0/9
(the trunk).
The source of the IMA link alarms in
Table 5-16
is one of the following interfaces: ATM0/2
through ATM0/9.
Table 5-15 E1 Network Interface Alarms
Alarm Severity
Description
LOS Detected
Critical
The E1 line has detected a loss of signal at the framer.
AIS Received
Critical
The E1 line is receiving an alarm indication signal.
RAI Received
Critical
The E1 line is receiving a remote alarm indication.
LOF Detected
(red alarm)
Critical
The E1 line has detected a loss of frame error.
LCD
Critical
The E1 line is experiencing a loss of cell delineation.
Table 5-16 IMA Link Network Interface Alarms
Alarm Severity
Description
LOS Detected
Critical
The IMA link has detected Loss of Signal at the framer.
LOF Detected
Critical
The IMA link has detected a Physical Layer
Convergence Procedure Loss of Frame error.
AIS Received
Critical
The IMA link is receiving an Alarm Indication Signal.
RAI Received
Critical
The IMA link is receiving a remote alarm indication.
LCD
Critical
The IMA link is experiencing a loss of cell delineation.
LIF
1
Critical
The IMA link is experiencing an LIF defect at the
near end.
LODS
2
Critical
The link differential delay between the link and the
other links in the group is over the tolerable value for
link differential delay.
Rx Failed
Critical
A persistent detection of a defect at the receiver.
The criteria for entering the condition are
implementation specific.
Tx Link Misconnected
Critical
The Tx link is not connected to the same far end IMA
unit as the other Tx links in the group. The detection is
implementation specific.
Rx Link Misconnected
Critical
The Rx link is not connected to the same far end IMA
unit as the other Rx links in the group. The detection is
implementation specific.
Persistent NE
3
RDI-IMA
Critical
One of the available remote defect indicators (including
IMA link specific defect) is in the link-related “Link
Information” field.
Rx Fault
Critical
Implementation specific Rx fault declared at the
near end.
Tx Fault
Critical
Implementation specific Tx fault declared at the
near end.