－
68
－
Channel data calculation functions
The function calculation is
performed.
When an error data (OVER,
UNDER, etc.) is included in
the measured data, it
becomes “CAL
ER”.
*
X
indicates the channel number.
* When the channel data calculation is specified for executing with the settings of the designated channel
number, the calculated results of the designated channel number are used. In addition, when the
designated channel number is greater than the channel number for calculation, the calculation results
obtained previously at the designated channel are used.
System information acquisition function
Other function
Symbol
Example Remarks
Measured data
CH
CH(X)
Calculation result
data
PCH
PCH(X)
X is channel No.
Previous calculated
result data
OCH
OCH(X)
Data at the previous
scanning (before 0.1
seconds)
Totalizer
ITG
ITG(X)
Refer to 2) Totalizing
operation
24-hour totalizing
ITG24
ITG24(X)
Refer to 2) Totalizing
operation
F value
FV
FV(X#To#Z#R)
Refer to 3) F value
Relative humidity
RH
RH(D#W)
Refer to 4) Relative humidity
Dew-point
temperature
DEW
DEW(T#H)
Refer to 5) Dew-point
temperature
Moving average
(an hour)
AVE
AVE(X#T)
Refer to 6) Moving average
Moving average
(5 minutes)
AVEH
AVEH(X#T)
Refer to 6) Moving average
Past data
(an hour)
OLD
OLD(X#T)
Refer to 7) Past data
Past data
(5 minutes)
OLDH
OLDH(X#T)
Refer to 7) Past data
First-order leg filter
IIR
IIR(X#T)
Refer to 8) First- order filter
Increment per time
PLS
PLS
(X#T )
Refer to 9) Increment per
time
Symbol
Example Remarks
CF card remaining
space
CF
CF(A
)
A = Unit of remaining space
0: MB
1: Minute
2: Hour
3: Day
Symbol
Example
Remarks
Wind display
AZI
AZI(A)
Refer to 10) Wind display
