－
9
－
4.3 Method of mounting the panel
1) Panel cutout size
2) Mounting method
(1)Insert this recorder into the panel cutout part of an instrument panel.
(2)Since there is a screw hole each (a total of two holes) in the right and left sides of this recorder, screw 2
fixing screws attached in two holes lightly.
(3)Next, put the hexagon head of this screw to the circular hole of the fixing metal and push the recorder
to the instrument panel firmly (from front) while making the fixing metal slide as shown in the figure. On
this condition, tighten the fixing screw with the attached wrench or a Phillips screwdriver.
In addition, be careful that the mounting metals differ by right and left. (Install the recorder by two
persons.)
パネルカット
28
1
281
+1
0
+1
0
(mm)
360
360
(mm)
Panel
cutout
●
Minimum interval for installation of multiple instruments
■
Mount on the panel and use
(1) This instrument has been designed to be mounted on an indoor instrumentation panel.
(2)
Use a panel made of a steel plate of 2mm to 6mm in thickness or a panel equivalent in strength.
Warning
Slide
