－
58
－
Setting the scale
Set the scale. (It is decided by the range type.)
Since the number of digits after decimal point set here becomes the number of digits after decimal point
for the measured value, enter a value correctly.
Setting the RJ (Reference junction compensation)
Set whether the RJ is internal or external.
Setting the burn out
None
The burnout function is not used.
UP
Set to the upscale burnout.
DOWN
Set to the downscale burnout.
Setting the recording cycle
Second
0.1 second, 0.2 seconds, 0.5 seconds, 1 second, 2 seconds, 3 seconds,
5 seconds, 10 seconds, 15 seconds, 20 seconds, 30 seconds
Minute
1 minute, 2 minutes, 3 minutes, 5 minutes, 10 minutes, 15 minutes,
20 minutes, 30 minutes, 60 minutes
