![background image](http://html1.mh-extra.com/html/chief/wk2/wk2_install-instructions-manual_2600237039.webp)
WK2 OFF-ROAD FRONT BUMPER
INSTALL INSTRUCTIONS
TABLE OF CONTENTS
REVISION B
29 AUGUST 2022
PAGE
of
39
40
TROUBLESHOOTING
[START]
TROUBLESHOOTING
[END]
1
TROUBLESHOOTING
FAULTY PARKING SESNOR READING
1. If you find after installing the Advanced Parking Sensor KIT the sensors give false readings, the likely cause is
excessive tighten of the housing fasteners. To fix this, loosen o
ff
the (4) M6 x 60mm Countersunk Bolts enough to
reduce the pressure on the sensor.
SUPPORT
Find answers online.
www.chiefproducts.com.au/pages/support
Having troubles? Make sure you’ve downloaded the most recent version
of these instructions from our website. We occasionally make updates.
www.chiefproducts.com.au/installation/wk2-roof-rack.pdf
If you need additional help, send us an email.
MAINTENANCE
FASTENERS
• Check fastener tightness regularly and tighten if required. We recommend checking fasteners after every large
o
ff
-road trip.
CORROSION PROTECTION
• After an o
ff
-road trip; rinse all mud, sand or debris o
ff
the product.
• After driving in salt water; rinse product thoroughly with fresh water.
EXTRA CARE
• If you’re planning to drive in a salty environment; spray fasteners with WD40 or an equivalent.
• If you’re planning to drive in a salty environment; spray product with Lanolin or an equivalent.
• Spray deep scratches (before they rust) with touch up paint to help inhibit corrosion.