WK2 OFF-ROAD FRONT BUMPER
INSTALL INSTRUCTIONS
TABLE OF CONTENTS
REVISION B
29 AUGUST 2022
PAGE
of
28
40
G
64
ADVANCED PARKING SENSOR KIT
Identify Middle Parking Sensor Type
1.
IF middle parking sensor has a Harness Plug
connecting to the rear (shown in the top 2 images),
trimming is necessary for the outer parking sensor
housing.
NOTE: No Harness Extension is needed with this sensor.
(Go to Step 66)
2. IF middle parking sensor has a Harness Plug
connecting to the side (shown in the bottom 2
images), trimming isn’t needed.
(Go to Step 69)
65
ADVANCED PARKING SENSOR KIT
Outer Parking Sensor Housing Trimming
1.
Trim the cut out on both Sensor Outer Housing [D]
(PART #: CP188000-0063/ CP1880000-0064).
Using a Utility Knife to remove the recessed panel (as
shown).
63
ADVANCED PARKING SENSOR KIT
Identify which Harness Extension to Use
1.
Inspect vehicle Inner Sensor harness plug that
connects to the Parking Sensor.
2. Compare to supplied Sensor Harness Extensions
[G]/[H] and selected the matching plug.
IF YOU HAVE:
• ADVANCED PARKING SENSOR KIT
(Go to Step 63)
• NO ADVANCED PARKING SENSOR KIT
(Go to next KIT)
WK2 OFF-ROAD FRONT BUMPER -- ADVANCED PARKING SENSOR KIT