![background image](http://html1.mh-extra.com/html/chief/wk2/wk2_install-instructions-manual_2600237025.webp)
WK2 OFF-ROAD FRONT BUMPER
INSTALL INSTRUCTIONS
TABLE OF CONTENTS
REVISION B
29 AUGUST 2022
PAGE
of
25
40
54
BUMPER
Bumper Fascia Preparation, Marking out and
trimming
1.
Remove LH and RH outer Grille & Surround panel
from Bumper Fascia by unscrewing the screws
highlighted in red.
2. Unclip the Grille from the Surround by pushing out the
black clips.
55
BUMPER
Bumper Fascia Trimming
1.
Using a 10mm drill bit, drill a hole in both top centre
cut corners.
56
BUMPER
Bumper Fascia Trimming (Stage 1)
1.
Starting from the holes drilled in the previous step,
trim across the top line.
2. Cut vertical widths next then finally the lower cuts.
3. Dress all trimmed edges using a smooth file.
NOTE: Recommend cut order for best support when cutting.
2017+ S-Limited/Summit Bumper shown.
2017+ S-Limited/Summit Bumper shown.
57
BUMPER
Bumper Fascia Trimming (Stage 2)
1.
Remove surround grille feature from Bumper Fascia
and mark the area along the feature line (red line) for
cutting.
2017+ S-Limited/Summit Bumper shown.
2017+ S-Limited/Summit Bumper