WK2 OFF-ROAD FRONT BUMPER
INSTALL INSTRUCTIONS
TABLE OF CONTENTS
REVISION B
29 AUGUST 2022
PAGE
of
36
40
92
Install Plastic Plugs into unused Holes
1.
Install (4) Ø14mm Blanking Plugs [S] (marked yellow)
into the unused holes for the Mach II Aero-Bar.
2. Install (8) Dia 7.5 x 16mm X-Mas Tree Plug [T]
(marked red) into the unused holes for the Advanced
Parking Sensor KIT and/or Number Plate Mount
holes.
NOTE: Only applicable for ORFB with unused bolt holes.
91
ORFB STONE GUARDS
Install Stone Guards
1.
Install LH and RH Stone Guards [C] using (4) M6
Socket Button Head screws [O] with M6 Locking
Washers [P].
2. Trim vehicle OEM Wheel Liner to meet and attach to
Stone Guards.
NOTE: Additional cut outs on the stone guards give areas to tether the
wheel liner.
Attachment point for
wheel liners.
90
NOMAD GRILLE
Install Nomad Grille
1.
Locate outer Vent Bar [D] to ORFB [A] with the
smaller face pointing upward; reference the
Front
View
for orientation when selecting the LH and RH
Vent Bars.
2. Fasten Vent Bars into place using M6 x 20mm Socket
Button Head Bolts [E] with M6 Flange Nuts [F]. Prior
to tightening, align both sides evenly.
Front View
Rear View
INSTALLATION COMPLETE -- WK2 OFF-ROAD FRONT BUMPER (NOMAD GRILLE)
INSTALLATION COMPLETE -- WK2 OFF-ROAD FRONT BUMPER
