![background image](http://html1.mh-extra.com/html/chief/wk2/wk2_install-instructions-manual_2600237034.webp)
WK2 OFF-ROAD FRONT BUMPER
INSTALL INSTRUCTIONS
TABLE OF CONTENTS
REVISION B
29 AUGUST 2022
PAGE
of
34
40
83
WINCH + ACC GUARD
ACC Guard Alignment
1.
Adjust ACC Mount Assembly so that green face has
approximately 5 - 6mm clearance to the blue face
then tighten into place.
IF YOU HAVE:
• O
ff
-Road Front Bumper (Apex Grille)
(Go to Step 86)
• O
ff
-Road Front Bumper (Nomad Grille)
(Go to Step 87)
• None of the above
(Go to Step 92)
85
Preparing ORFB for Grille
1.
Clip (2) M6 Sheetmetal Nuts [L] supplied at the
highlighted tabs on the ORFB; align the holes.
NOTE: Take care to not scratch through the powder coat.
84
Vehicle Bumper to ORFB Clearance Adjustment
1.
If the Bumper fascia is contacting or there is too
much clearance with the ORFB, Bumper Support
Brackets [E] can be used to better locate the vehicle
bumper positioning.
2. Once an optimal position is decided on, secure
Bumper Support Brackets [E] using an M6 x 20mm
Bolt [O] with M6 Wedge-Lock Washer [P] and M6
Flange Nut [R].
IF YOU HAVE:
• WINCH + ACC GUARD
(Go To Step 83)
• No ACC
(Skip to step 84)