WK2 OFF-ROAD FRONT BUMPER
INSTALL INSTRUCTIONS
TABLE OF CONTENTS
REVISION B
29 AUGUST 2022
PAGE
of
12
40
13
Remove Bumper Support
1. Remove (2) plastic fasteners from the Bumper
Support.
2. Remove Bumper Support.
NOTE: Bumper Support is no longer needed.
14
OEM Tow Hooks
Remove OEM Tow Hook Bracket
1. Unbolt (2) M10 bolts [C in side diagram] holding OEM
Tow Hook bracket to vehicle.
2. OEM Tow Hook Bracket can now be removed.
NOTE: This step is only required for WK2s with OEM Tow Hooks. This
diagram is taken from Mopar’s o
ffi
cial installation instructions.
15
OEM Tow Hooks
Remove OEM Tow Hooks
1. Unbolt (2) M10 bolts [E in side diagram] holding front
of Tow Hook to vehicle.
2. Unbolt 30mm Nut on backside [F in side diagram]
and slide Tow Hook forward out of bracket.
NOTE: This step is only required for WK2s with OEM Tow Hooks. This
diagram is taken from Mopar’s o
ffi
cial installation instructions.
IF YOU HAVE:
•
OEM Tow Hooks
(Go To Step 14)
•
No OEM Tow Hooks
(Go To Step 16)
