WK2 OFF-ROAD FRONT BUMPER
INSTALL INSTRUCTIONS
TABLE OF CONTENTS
REVISION B
29 AUGUST 2022
PAGE
of
27
40
62
NUMBER PLATE MOUNT KIT
Installing Side Mount Number Plate
1.
Install Number Plate [B] using (1) M6 x 20mm
Countersunk Socket [G] (circled in red) and M6
Flange Nylock Nut [J].
(Leave loose if installing Nomad
Grille).
2. If NO Mach II Aero-Bar is being installed, fasten (2)
M10 x 25mm Button Head Socket [C] (circled in blue)
with M10 Flange nuts [D].
3. If Mach II Aero-Bar is being installed leave aside
fasteners for Mach II Aero Bar installation.
4. Install Number Plate to Side Mount using supplied
bolts:
For USA variant use M6 Button Head [F] with M6 Flat
Washer [I] and M6 Flange Nuts [K].
For AUS variant use M5 Button Head [F] with M5 Flat
Washer [I] and M5 Flange Nut [K].
Australian plate shown.
WK2 OFF-ROAD FRONT BUMPER INSTALLATION START
ORFB preparation:
Prior to bolting the ORFB [A] onto your vehicle, it is recommended to fit chosen accessories on to
ORFB before installing it onto the vehicle.
S-Limited/Summit models require the Bumper Fascia to be installed prior to fitting the ORFB onto the
vehicle.
Overland, Limited and Trail Hawk style Bumper Fascia’s can be installed af
t
er the ORFB has been
mounted.
IF YOU HAVE:
• “CENTRE MOUNT” NUMBER PLATE
(Go to Step 61)
• “SIDE MOUNT” NUMBER PLATE
(Go to Step 62)
• NO NUMBER PLATE MOUNT KIT
(Go to next KIT)
61
NUMBER PLATE MOUNT KIT
Installing Centre Mount Number Plate
1.
Using (4) M6 x 20mm Button Head Socket [E] with
M6 Wedge-Lock Washer [H] and M6 Flange Nylock
Nut [J], bolt Centre Mount Number Plate [A] to the
top of the ORFB [A].
2. Install Number Plate to Centre Mount [A] using
supplied bolts:
For USA variant use M6 Button Head [F] with M6 Flat
Washer [I] and M6 Flange Nuts [K].
For AUS variant use M5 Button Head [F] with M5 Flat
Washer [I] and M5 Flange Nuts [K].
WK2 OFF-ROAD FRONT BUMPER -- NUMBER PLATE MOUNT KIT
