![background image](http://html1.mh-extra.com/html/chief/wk2/wk2_install-instructions-manual_2600237010.webp)
WK2 OFF-ROAD FRONT BUMPER
INSTALL INSTRUCTIONS
TABLE OF CONTENTS
REVISION B
29 AUGUST 2022
PAGE
of
10
40
5
Remove underside OEM fasteners
1. By hand, quarter turn the fasteners to release them.
7
Disconnect High Pressure Headlamp Washer
1. Secure Washer Panel and gently draw out Washer
from the Bumper Fascia.
2. Holding the Washer gently, release the mount tags and
remove Washer Panel from Bumper Fascia.
6
SUMMIT
Releasing Bumper Fascia from Fender
1. Clear wheel liner from bumper connection.
2. Remove lower (white) clip from retainer by depressing
the tag.
NOTE: Use of a flathead screwdriver can help release plastic white clip.
Fender
Bumper
Retainer
8
Unclip Upper Facia
1. Unclip upper facia from wheel wells on each side
(drivers & passengers).
2. Unclip upper facia from head lights in engine bay on
each side (drivers & passengers)
3. Set aside the upper facia in a safe place.
NOTE: For 2011-2012 Australian WK2’s disconnect the headlight washer
hose on the left side of the vehicle, (not shown).
IF YOU HAVE:
•
Summit Bumper
(Go To Step 6)
•
Overland Bumper
(Go To Step 7)
IF YOU HAVE:
•
High Pressure Headlamp Washer on Bumper Fascia
(Go To Step 7)