![background image](http://html1.mh-extra.com/html/chief/wk2/wk2_install-instructions-manual_2600237018.webp)
WK2 OFF-ROAD FRONT BUMPER
INSTALL INSTRUCTIONS
TABLE OF CONTENTS
REVISION B
29 AUGUST 2022
PAGE
of
18
40
34
WINCH
Trim OEM Plastic Radiator Surround and Fix Wiring
Loom
1. On some models of WK2’s you may have to trim the
radiator surround plastic to allow the wiring loom to
pass through. Using a sharp blade, cut a hole (red
lines).
2. Fix the wiring loom with some zip ties to the Bonnet
Support Struts [C] (red circles).
37
NON WINCH + No WK2 Recovery Point-Hook
Install OEM Wiring Loom Bolt
1. Install (1) M6 OEM Wiring Loom Bolt into frame.
2. Do this for both sides (passenger & driver).
35
WINCH
Install Fusion Fairlead to ORFB
1.
Install Fusion Fairlead so that fastening bosses locate
to the ORFB Centre (red circle).
2. Fasten using (2) M8 x 16mm Bolt [C] with M8 x 28OD
Heavy Duty Flat Washers [E] (Torque to 20Nm).
INSTALLATION COMPLETE -- WK2 WINCH WK2 CHASSIS MOUNTS (Front)
IF YOU HAVE:
•
WINCH + WK2 SUMP PROTECTION PLATE
(Go to Step 45)
•
WINCH + NO WK2 SUMP PROTECTION PLATE
(Go to Step 46)
36
NON WINCH + WK2 Recovery Point-Hook
Bolt WK2 Recovery Point to chassis
1. Reference Point/Hook instructions:
https://cdn.shopify.com/s/files/1/0277/9567/files/wk2-recovery-
point.pdf?2448074621604788239
NOTE: Step 8, install strengthening bolt facing the head down
(highlighted in blue box)
•
NON WINCH + WK2 RECOVERY POINT/HOOK
(Go to Step 36)
•
NON WINCH + NO WK2 RECOVERY POINT/HOOK
(Go to Step 37)
IF YOU HAVE:
•
WK2 AIR SUSPENSION KIT
(Go To Step 38)
•
NONE OF THE ABOVE
(Go To Step 39)