![background image](http://html1.mh-extra.com/html/chief/wk2/wk2_install-instructions-manual_2600237011.webp)
WK2 OFF-ROAD FRONT BUMPER
INSTALL INSTRUCTIONS
TABLE OF CONTENTS
REVISION B
29 AUGUST 2022
PAGE of
11
40
10
Disconnect Fog Lights
1. Release Fog Light harness plugs by unclipping the 2
outer tags (circled in red) then pull out.
2. Do this for both sides (driver & passenger).
∫
9
Disconnect Parking Sensor Harness
1. Disconnect parking sensor wiring loom, located on the
right hand side behind wheel liner.
2. Unplug sensor by releasing Red Locking Tab.
Locked
Unlocked
∫
11
Remove Bumper Fascia
1. With all plugs unclipped, pull the complete Bumper
Fascia from the vehicle.
12
Remove ACC Camera
1. Disconnect wiring loom from ACC camera.
2. Remove (2) M5 bolts holding the ACC camera bracket
to the steel bumper (circled in red).
3. Set ACC camera aside in a safe place.