Chicago Dryer King Edge, Instruction Manual

Page: 9 / 290

King Edge Introduction
1-1
Chapter 1
INTRODUCTION
This chapter includes the following sections:
1.1 Warranty 1.3 Safety
1.2 Scope of Manual 1.4 Equipment Description
The King Edge automatic cornerless spreader/feeder allows operators to feed sheets or other large
pieces of flatwork into a flatwork ironer or automatic folder from two stations. A built-in bypass conveyor
allows feeding of small pieces through the King Edge without altering the position of the feeder or its
discharge conveyor.
Like the rest of the CHICAGO
®
product line, the King Edge (Figure 1-1) is designed, manufactured,
and assembled in Chicago, Illinois. Before the CHICAGO
®
nameplate is affixed to any machine, a final
inspection is performed, including thorough testing under load conditions.
Any questions concerning the installation, operation, or repair of the unit should be directed to a local
authorized CHICAGO
®
dealer or the Chicago Dryer Company factory Service Department at:

Chicago Dryer Company

(773) 235-4430
2200 North Pulaski Fax (773) 235-4439
Chicago, Illinois USA 60639-3737 Email service@chidry.com
Figure 1-1: The King Edge provides high quality spreading and feeding.