Chicago Dryer King Edge, Instruction Manual

Page: 35 / 290

King Edge Operating Guidelines
3-3
Safety Interlock Switches
The spreader/feeder is equipped with safety
interlock switches (Figure 3-4) behind each
endframe door and the front access guard.
When any of these is opened, all moving parts
immediately stop.
Safety interlock switches are not intended to
lockout the unit. Site management is responsible
for developing and implementing lockout/tagout
procedures that comply with government
standards for use when servicing the unit.
Safety Labels
WARNING (orange) and CAUTION (yellow)
labels (Figure 3-5) are placed at locations around
the unit to keep operators and maintenance
personnel alert in particular areas.
WARNING messages alert personnel that
personal injury may result from not following
recommended procedures.
CAUTION messages alert personnel that the
machine may be damaged
if conditions are
poor or proper practices and procedures are not
observed.
When training operators, take time to review,
understand, and locate all areas where labels are
posted.
NOTE: Do not remove safety
labels at any time. If a label
needs to be replaced, contact
Chicago Dryer Company for free
replacements.
Figure 3-4: Each endframe door and the front
access guard has a safety interlock
switch.
Figure 3-5: Safety labels remind operators and
maintenance personnel that care must
be taken when working near these
areas.