Chevrolet Spark Lite, Owner'S Handbook Manual

Page: 243 / 265

Problems on the Road
. . . 242
CAUTION
(Continued)
• Make sure to use the proper
jacking locations.
• Place the jack under the jack-
want to change.
• The jack should be perpendic-
ular to the ground when lift-
ing the vehicle.
Call for assistance when condi-
tions are not satisfactory for
jacking the car.
The equipment is in a storage
compartment in the floor of the
rear cargo area.
Remove the floor cover to access
the compartment.
1. Remove the jack and jacking
tools on the foam tray (if
equipped) in the rear cargo
storage area.
For information about the jack,
see "Jack Specifications" later in
this section.
2. Turn the retainer on the com-
tray counterclockwise and
remove the retainer.
3. Remove the compact spare
4. Use the flat edge of the wheel
wrench or a screwdriver to
pry off the wheel cover (if
equipped).
09Spark_GenR.fm Page 242 Monday, May 5, 2008 2:03 PM
ing point nearest the tyre you
pact spare tyre under the foam
tyre.
243 . . .
–
–
–
–
–
Section 5
5. Use the wheel wrench to
loosen the wheel nuts by one
turn each.
CAUTION
Do not remove the wheel nuts
until the wheel is raised off the
ground.
6. Attach the jack handle to the
jack.
7. Turn the jack handle clockwise
to raise the jack lift head
slightly.
8. Place the jack under the jack-
want to change.
9. Turn the jack handle clockwise
to raise the jack.
2
1
4
3
09Spark_GenR.fm Page 243 Monday, May 5, 2008 2:03 PM
ing point nearest the tyre you