Chevrolet Spark Lite, Owner'S Handbook Manual

Page: 208 / 265

Service and Maintenance
. . . 206
CAUTION
Clean halogen bulbs with alco-
hol or mineral spirits and a lint-
free cloth. Be sure not to touch
them with your bare hands.
Fingerprints on a halogen bulb
may drastically shorten the
bulb’s effective life.
Parking Lights
1. Open the hood.
2. Remove the headlight assem-
bly.
3. Remove the rubber cap cover-
ing the bulb assembly.
4. Pull out the parking light bulb
assembly located next to the
headlight bulb.
5. Pull the bulb straight out to
remove it from the socket.
6. Reverse the steps to install a
new bulb.
Front Turn Signal Lights
1. Open the hood.
2. Remove the headlight assem-
bly.
3. Turn the bulb socket counter-
clockwise to unlock the socket
from the housing.
4. Pull the bulb assembly out of
the light housing.
5. Gently push in and turn the
bulb counterclockwise to
remove it from the socket.
09Spark_GenR.fm Page 206 Monday, May 5, 2008 2:03 PM
207 . . .
–
–
–
–
Section 4
6. Reverse the steps to install a
new bulb.
When installing the new bulb
into the socket, press it in
while turning it clockwise.
When installing the socket into
the housing, rotate the socket
clockwise.
Front Fog Lights (If equipped)
CAUTION
Performing this vehicle
maintenance procedure
requires special skills, tools
and equipment.
It is recommended that you
have your dealer perform this
service.
Before attempting any service
procedure yourself, make sure
that you are very familiar with it
and that you are confident you
can complete it safely.
Otherwise, you could be
injured or your vehicle could be
damaged.
1. Disconnect the wiring harness
connector from the bulb.
2. Turn the bulb counterclock-
wise to remove it.
3. Reverse the steps to install a
new bulb.
09Spark_GenR.fm Page 207 Monday, May 5, 2008 2:03 PM