CHC
CTS-112R4 user manual
48
3)
Procedure: press [4] (COLUMN OFFSET).
Operation: [4]
4)
Procedure: aim to the center of the column (P1) and press [F1] (MEAS) to start measuring. After
measurement, the system will remind you to implement angle measurement of the left point(P2).
Operation: shoot P1 and press [F1]
5)
Procedure: aim to the left point of the column surface (P2) and [F4] (SET) to finish measurement.
Then it will display the message to measure the angle of the right point (P3). When displaying
“<Range Error>, it reminds you to
focus on the right target.
Operation: collimate P2 and press [ F4]
6)
Procedure: collimate the right of the column surface (P3) and press [F4] (SET). Then the distance
between the instrument and the column center (P0) will be calculated.
Operation: collimate P3 and press [ F4]
