CHC
CTS-112R4 user manual
87
12.5.
Measurement REOM point to line
This mode is used to obtain the coordinate data with the origin A (0, 0, 0) and the line AB as N axis. Place
the 2 prisms at the A and B on the line, and place the instrument at unknown point C. After measuring
the 2 prisms, the coordinate and the azimuth of the instrument will be calculated and recorded.
1)
Press [MENU] and then [4] to enter PROGRAMS menu.
2)
Press [5] (POINT TO LINE).
3)
Aim to the prism P1(Origin), and press [F1] to measure.
