CHC
CTS-112R4 user manual
13
Page1
ALL:
Start coordinates measurement and save the results in respective job. (Measurement files
and coordinates files are selected in DATA COLLECT menu.)
MEAS:
Start coordinates measurement
MODE:
Shift the distance measurement modes (F.S/F.N/F.R/T.R)
P1↓:
Display the soft key functions in page2
Page2
HT:
Set the instrument height and target height
BS:
Set the coordinates of the backsight point
OCC.:
Set the coordinates of the occupied point
P2↓:
Display the soft key functions in page3
Page3
OFFS:
Offset measurement mode
S.O:
Coordinates stake out mode
MEAN:
Set the measuring time of fine measurement
P3↓:
Display the soft key functions in page1
4.4.
Star (
★
) key mode
Press
★
, the screen will show:
Press Star key [
★
], you can set the below items:
1)
Contrast: Press [↓] , you can adjust the contrast of the LCD.
2)
Illumination:
Press [F1]: turn on the background light
Press [F1] again: turn off the background light
3)
Tilt Compensation: press [F2] to enter to settings of tilt compensation. Press [F1] or [F3] to switch tilt
sensor ON/OFF.
4)
Reflector: Press [
★
] to set the reflector type. Press [→] every time to shift the reflector type among
Prism/NON-P/Sheet.
5)
Pointer: Press [F3] to activate the visible laser beam.
6)
Parameter: Press [F4] to select “PARA”, you can set the prism constant, PPM value, temperature and
atmospheric pressure and check the reflecting signal.
