CHC
CTS-112R4 user manual
47
8)
Procedure: press [CORD] to display the coordinates of P0.
Operation: [CORD]
Press [F1] (NEXT) to return to Procedure4.
Press [ESC] to return to distance measurement mode.
8.4.4.
Column offset
First, measure the distance to the point (P1) of the column surface directly. Then by measuring the
azimuth angles of P2 and P3 on the column, you can calculate the distance, azimuth and coordinates of
the column center. Azimuth of the column center is the average value of point of column surface (P2)
and azimuth (P3).
Refer to
section 9.2 “Setting coordinates of occupied point”
.
1)
Procedure: p
ress [F4] (P1↓)under distance measurement mode to enter to P2.
Operation: [F4]
2)
Procedure: press [F1] (OFSET).
Operation: [F1]
