CHC
CTS-112R4 user manual
75
12.
Measurement program mode
Press MENU key, and instrument will entry to menu mode. In this mode, you can set and check.
12.1.
Remote height measurement (REM)
To obtain the target height in which user cannot lay prism, just lay the prism in any point above target on
the plumb line, and then start REM.
12.1.1.
Known prism height (e.g. h = 1.3 m)
1)
Press [MENU] and then [4] to enter PROGRAMS function.
2)
Press [1] (REM).
3)
Press [1] and select the REM mode that requires inputting prism height.
