CHC
CTS-112R4 user manual
45
8.4.3.
Plane offset
This function can measure the point that cannot be measured directly, e.g. measure the distance or
coordinates of a plane edge.
First, measure any 3 points of the plane (P1, P2, P3) in this mode. Then aim to P0. It will calculate and
display the distance and coordinates of the intersection of collimation line and this plane.
Refer to
section 9.2 “Setting coordinates of occupied point”
.
1)
Procedure: p
ress [F4] (P1↓)under distance measurement mode to enter to P2.
Operation: [F4]
2)
Procedure: press [F1] (OFSET).
Operation: [F1]
3)
Procedure: press [3] (PLANE OFFSET).
Operation: [3]
