CHC
CTS-112R4 user manual
32
7.2.
Shift the horizontal angle (right/left)
Go to angle measurement mode.
1)
Procedure: press [F4]
(↓)
twice to turn to P3.
Operation: [F4] x 2
2)
Procedure: press [F2] (R/L) to shift the mode from horizontal right angle (HR) to left angle (HL).
Operation: [F2]
3)
Procedure: press [F2] again to return to the mode of horizontal right angle (HR).
Every pressing on [F2] (R/L) is to shift between HR/HL.
7.3.
Setting horizontal angle
7.3.1.
Setting by [HOLD]
Go to angle measurement mode.
1)
Procedure: rotate telescope to the horizontal angle which is to be defined by horizontal tangent screw.
Operation: display the angle
2)
Procedure: press [F4] to turn to P2.
Operation:
[F4]
