CHC
CTS-112R4 user manual
66
8)
To display coordinates PO point, press [CORD].
9)
Press F4 (YES), the data is recorded. Press ESC to exit the column offset mode and return to the
previous mode.
10.5.
Setting config of data collection
In DATA COLLECT menu, press F4[P↓] to
enter DATA COLLECT 2/2, and then press 2.[CONFIG]
1)
NEZ AUTO CALC
During collecting data, choose whether to use the measured data to calculate coordinate data and save
into the coordinate file automatically.
2)
Collect seq
Set the sequence of data collection and edition.
EDIT→ MEAS: Set the PT# name, PCODE and target height
firstly and then collect data. MEAS→ EDIT: Collect data firstly, and then allow the customer to edit the
collected PT# name, PCODE, target height.
3)
Data confirm
Switch of recording data after collection.
ON: indicates whether to record.
4)
SELECT SD/HD
Set the displaying sequence of data collection.
If need to change the setting when collecting data, you should set parameter at first.
