CHC
CTS-112R4 user manual
56
10.2.
Selecting a file for data collection
A file used by data collection mode must be selected at first. Then the screen of selection a file is
displayed. A selection from data collection menu is possible in the data collecting menu of this mode.
1)
Press [MENU] to enter MENU1/2, and then press [1] (DATA COLLECT).
2)
Press [F2] (LIST).
3)
Press [ENT], success to call out file, and then the screen returns to DATA COLLECT MENU 1/2.
10.3.
Occupied point and backsight point
The occupied point and direction angle in the data collect mode are linked with the occupied point and it
is possible to set or change the occupied point and direction angle from the data collect mode.
Occupied point can be set by two setting methods as follow:
•
Setting from the coordinate data stored in the internal memory
•
Direct key input
The following three setting methods for back sight point can be selected:
•
Setting from the coordinate data stored in internal memory
•
Directly input the coordinate of back sight point
•
Directly input the set angle
The setting of azimuth is decided by measurement.
How to save coordinate data into internal memory, please refer to section 14.4
“Load data”.
