CHC
CTS-112R4 user manual
72
2)
Press [F1](INPUT).
If there is no need to save the new point data, press [F3](SKP) and start from step 5.
3)
Enter the new point name, Pcode and instrument height. Press [F4] (ENT).
Refer to section 6.7 “Method of inputting, alphanumeric characters”.
4)
System indicates to enter name of the target point, press [F1] (INPUT).
5)
Enter the point# of point A, and press [F4] (OK).
To enter the known point coordinate data, press [F3](NEZ).
6)
The coordinates of the point display. Press [F4] (YES) to confirm.
7)
The display indicates to enter target height, press [F4] (ENT) after inputting.
