Ceyear 3656 Series, Quick Start Manual

Page: 15 / 53

Ready for Use
7
conditions in most cases, it does not mean that this is a safe operating method.
2.3 Front Panel
This section describes front panel of 3656 Series Vector Network Analyzer in details, as shown in
Figure 2.1:
Figure 2.1 Front Panel of 3656 Series Vector Network Analyzer
The features of front panel keys are described as below:
Table 2-2 Description of Front panel keys
S/N Name Description
1 LED Screen
The instrument is equipped with a 10.4-inch LED screen with a resolution
of 800×600, which displays all measurement related information.
2 ON / Standby
Used for choosing between power-on or standby state of the analyzer,
yellow indicator on the right side of the swich is lit in the standby state;
press the swich once ,the indicator turning to green, which indicates the
instrument is under “Working” status.
3
Ground
Terminal
Connected to the chassis of the analyzer. You may insert antistatic wrist
strap plug here when operating the instrument.
4 USB Port Used to connect keypad, mouse or other USB devices.
5 Test Ports
Include 2 ports of N-type female which the DUT is connected, switching
between signal source and receiver. While signals are being output from a
test port , the yellow LED above the test port is lit.
6 Utility Block
The keys related to the store and recall function, record function, macro
function, preseting analyzer, printing and help etc.
7 Trace/Channel Used to select active traces and channels on display of the analyzer.
8 Stimulus Block
For Setting up frequency range, sweep type and trigger mode of the signal
sources and triggers.
9 Entry Block
The keys are used to enter numeric data for measure setting, which can
also activate main menu etc.
10 Response Block
For setting up response measurements, such as format, scale, calibration,
averaging of traces etc.
11 Adjust Block Include adjustment knobs and navigation key, and moving among selected
1. LED Screen
2. ON/
Standby
3. Ground
Terminal
13. Soft Keys
12. Marker/ Analysis
11. Adjust Block
10. Response block
9. Entry Block
8. Stimulus Block
7. Trace/Channel
6. Utility Block
5. Test Ports
4. USB Port