Ceyear 3656 Series, Quick Start Manual

Page: 16 / 53

Ready for Use
8
menus or changing numeric values.
12
Marker/
Analysis
Marker function for searching, data math and memory of measurement
traces; data analysis function for limit test,Bandwidth test, fixture
simulator etc.
13 Soft Keys
A group keys on the screen. any key on front panel can recall
corresponding soft key menu.
Ultimate damage bearing level of instrument port: +26dBm radio frequency power. Input
beyond this range might burn the analyzer.
2.4 Operating Interface
3656 Series Vector Network Analyzer is equipped with TFT 10.4 inch LED crystal display screen
and supports touch-screen function, which displays all measurement setup, status and results etc.
Operating interface after opening all tool bars are as the following picture:
Figure 2.2 3656 Series Vector Network Analyzer Operating Interface
Descriptions over screen display are as follows:
Table 2-3 Interface Display Descriptions
S/N Name Description
1
Time
Domain
Transform
Turn on or off time domain function and door function, which can switch
frequent domain data to time domain data for measurement and analysis.
2 Marker
Turn on or off marker function, which can enable 9 markers and one
reference marker simultaneously. You may set up activation value of
！
WARNING
1. Time Domain
Transform
2. Marker
3. Measurement 4. Menu
5. Sweep Control
6. Active Entry 7. Stimulus
8. Softkey
toolbar